返回信息流我们的设备在#show log 后看到经常有端口和对应Neighbour DOWN掉的情况,谁帮忙看看?
Nov 1 04:10:59.339: %OSPF-5-ADJCHG: Process 1, Nbr 211.137.141.141 on FastEthernet2/0 from LOADING to FULL, Loading Done
Nov 1 04:11:06.867: %OSPF-5-ADJCHG: Process 1, Nbr 211.137.141.138 on FastEthernet2/0 from LOADING to FULL, Loading Done
Nov 1 04:58:09.181: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.50.3 on FastEthernet2/0 from 2WAY to DOWN, Neighbor Down: Dead timer expired
Nov 1 04:58:11.897: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.50.1 on FastEthernet2/0 from 2WAY to DOWN, Neighbor Down: Dead timer expired
Nov 1 04:58:11.981: %OSPF-5-ADJCHG: Process 1, Nbr 211.137.141.138 on FastEthernet2/0 from FULL to DOWN, Neighbor Down: Dead timer expired
Nov 1 04:58:13.357: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.51.1 on FastEthernet2/0 from 2WAY to DOWN, Neighbor Down: Dead timer expired
Nov 1 04:58:14.301: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.51.2 on FastEthernet2/0 from 2WAY to DOWN, Neighbor Down: Dead timer expired
Nov 1 04:58:14.489: %OSPF-5-ADJCHG: Process 1, Nbr 211.137.141.141 on FastEthernet2/0 from FULL to DOWN, Neighbor Down: Dead timer expired
Nov 1 04:58:18.533: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.50.2 on FastEthernet2/0 from EXSTART to DOWN, Neighbor Down: Dead timer expired
Nov 1 05:04:31.995: %OSPF-5-ADJCHG: Process 1, Nbr 211.137.141.138 on FastEthernet2/0 from LOADING to FULL, Loading Done
Nov 1 05:04:34.503: %OSPF-5-ADJCHG: Process 1, Nbr 211.137.141.141 on FastEthernet2/0 from LOADING to FULL, Loading Done
这是一条镜像帖。来源:北邮人论坛 / communications / #894同步于 1 周前
Communications机器人发帖
CISCO 7206的LOG,谁能帮忙看看?
vestwood
1 周前镜像同步2 回复
订阅后,新回复会通过你的通知中心匿名送达。
2 条回复
发信给todayigigi
呵呵 他知道
【 在 vestwood (琴台故径凤求凰) 的大作中提到: 】
: 我们的设备在#show log 后看到经常有端口和对应Neighbour DOWN掉的情况,谁帮忙看看?
: Nov 1 04:10:59.339: %OSPF-5-ADJCHG: Process 1, Nbr 211.137.141.141 on FastEthernet2/0 from LOADING to FULL, Loading Done
: Nov 1 04:11:06.867: %OSPF-5-ADJCHG: Process 1, Nbr 211.137.141.138 on FastEthernet2/0 from LOADING to FULL, Loading Done
: ...................
这是ospf建立邻居的过程.LOADING to FULL, Loading Done 这个说的是完成临接关系的建立.from 2WAY to DOWN,是协商失败之后down了,原因可能是dr选举有关.
我想问的是
211.137.141.138 on FastEthernet2/0
10.1.50.3 on FastEthernet2/0
很奇怪,你的FastEthernet2/0的网段应该是211.137.141.0/24,那么10这个网段一定是对端配错的.它在捣乱.看看优先级什么的.